cara menggunakan modem hp smartfren xstream di linux debian

1. install dulu wvdial dengan cara ketik di terminal "apt-get install wvdial"
2. tancapkan kabel usb ke komputer, kemudian aktifkan mode modem di hp nya
3. masuk terminal login sebagai root dengan cara ketik "su" lalu enter dan masukkan pasword root
4. jika suda login sebagai root, lalu ketik di terminal "lsusb"
root@debian:/home/badik# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 174f:1134 Syntek
Bus 004 Device 005: ID 15eb:0001 

5. lalu ketik di terminal "eject"
6. kemudian ketik "modprobe usbserial vendor=0x15eb product=0x0001"
7. lalu ketik di  terminal "wvdialconf"
root@debian:/home/badik# wvdialconf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

Modem Port Scan<*1>: S0   S1   S2   S3  
WvModem<*1>: Cannot get information for serial port.
ttyUSB0<*1>: ATQ0 V1 E1 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 Z -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB0<*1>: Modem Identifier: ATI -- Manufacturer: +GMI: VIA TeleCom
ttyUSB0<*1>: Speed 9600: AT -- OK
ttyUSB0<*1>: Max speed is 9600; that should be safe.
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
WvModem<*1>: Cannot get information for serial port.
ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
WvModem<*1>: Cannot get information for serial port.
ttyUSB2<*1>: ATQ0 V1 E1 -- OK
ttyUSB2<*1>: ATQ0 V1 E1 Z -- OK
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB2<*1>: Modem Identifier: ATI -- Manufacturer: +GMI: VIA TeleCom
ttyUSB2<*1>: Speed 9600: AT -- OK
ttyUSB2<*1>: Max speed is 9600; that should be safe.
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK

Found a modem on /dev/ttyUSB0.
Modem configuration written to /etc/wvdial.conf.
ttyUSB0<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
ttyUSB2<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
root@debian:/home/badik#

8. lalu ketik "gedit /etc/wvdial.conf"
9. lalu copy dan pastekan kode di bawah ini
[Dialer smart]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
Phone = #777
New PPPD = yes
ISDN = 0
Username = smart
Password = smart
Modem = /dev/ttyUSB0 
Baud = 460800
Command Line = ATDT
Stupid Mode = yes
Carier Check = no

10. kemudian save
11. kemudian ketik di  terminal "wvdial smart" jika berhasil connect maka akan muncul kode sebagai berikut

root@debian:/home/badik# wvdial smart
--> WvDial: Internet dialer version 1.61
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
CONNECT 3100000
--> Carrier detected.  Starting PPP immediately.
--> Starting pppd at Mon Oct 21 18:43:27 2013
--> Pid of pppd: 15784
--> Using interface ppp0
--> pppd: ��r [08]�r
--> pppd: ��r [08]�r
--> pppd: ��r [08]�r
--> pppd: ��r [08]�r
--> local  IP address 10.217.254.238
--> pppd: ��r [08]�r
--> remote IP address 10.20.31.9
--> pppd: ��r [08]�r
--> primary   DNS address 10.17.125.233
--> pppd: ��r [08]�r
--> secondary DNS address 10.17.125.231
--> pppd: ��r [08]�r

cara menggunakan modem hp smartfren xstream di linux debian 2013-10-21T19:18:00+07:00 Rating: 4.5 Diposkan Oleh: badik